Secomax™ New PCBN grade chain 01:37

High performance PCBN Grades for hard part finish turning

Don’t miss the opportunity to utilize the great performance of the new PCBN grade chain for hard part finish turning. These grades show top class performance in four different ISO application areas and at the same time they have a well-balanced overlap so that a lot of different machining strategies can be selected, all depending on the customer demand.

Use the wear resistance of the new H05 grade or select some of the tougher alternatives perhaps in combination with a wiper, SECO now have a lot of PCBN options available for any hard turning application. CH0550, CBN060K and CH2540 are available as solid and brazed, solid inserts are normally the most cost effective solution.

Make sure that You find the optimal solution for Your hard turning application.

For more information, please contact your local Seco representative, or our Advanced material (PCBN/PCD/CERAMIC) team.

Product Manager: Anders Wickman Product Manager SECOMAX PCBN/PCD/CERAMIC SECO TOOLS AB 737 82 Fagersta, Sweden Office +4622340254 Mobile +46703431200 e-mail:anders.wickman@secotools.com

Secomax™ CH3515 07:52

High performance PCBN Grades for hard part turning 

CH3515 was launched in SECO NEWS 2016-1 and is a completely new grade for H35, heavy interrupted cuts.

If there is a turning operation with really heavy interruptions, for example OD turning of splines the new CH3515 is the correct choice.

 Especially if the interruption is not chamfered the application must be seen as H35.

For more information, please contact your local Seco representative, or our Advanced material (PCBN/PCD/CERAMIC) team.

Author: Per Ola Jönander Product Specialist SECOMAX PCBN/PCD/CERAMIC SECO TOOLS AB 737 82 Fagersta, Sweden Office +4622340818 Mobile +46703163555 email:perola.jonander@secotools.com

Now in stock - CH2540 22:51

Secomax™ CH2540 03:15

High performance PCBN Grades for hard part turning 

CH2540 was launched in SECO NEWS 2016-1 and is a completely new grade for H25, interrupted cuts, but also for mixed operations with both interrupted and continuous cuts.

The new CH2540 has bimodal grain size distribution, where fine grained cBN (1 µm) with 15 µm grains added to the structure. One advantage of this type of structure is the crack deflection that the coarser grains cause.

By causing cracks to deflect, it takes longer time for the cracks to propagate from edge to edge resulting in less chipping. In a fine grain structure, the cracks moves around the fine grains, while the coarser grains in the new substrate structure cause the cracks to deflect around the coarser grains. This has the biggest effect in interrupted cuts.

For more information, please contact your local Seco representative, or our Advanced material (PCBN/PCD/CERAMIC) team.

Author: Per Ola Jönander Product Specialist SECOMAX PCBN/PCD/CERAMIC SECO TOOLS AB 737 82 Fagersta, Sweden Office +4622340818 Mobile +46703163555 email:perola.jonander@secotools.com

Secomax™ CH0550 00:24

High performance PCBN Grades for hard part turning 

CH0550 was launched in SECO NEWS 2016-1 and is a completely new grade for high cutting speeds in H05, continued cut application area.

The new and patent nanolaminate coating gives an extra wear resistance together with the new substrate which is designed to withstand crater wear at high cutting speeds and generate good surface finish.

In pure H05 applications gives the new CH0550 superior tool life compared with earlier recommended grades. See below application example.

For more information, please contact your local Seco representative, or our Advanced material (PCBN/PCD/CERAMIC) team.

Author: Per Ola Jönander Product Specialist SECOMAX PCBN/PCD/CERAMIC SECO TOOLS AB 737 82 Fagersta, Sweden Office +4622340818 Mobile +46703163555 email:perola.jonander@secotools.com

Secomax™ CH3515 02:11

High performance PCBN Grades for hard part turning

 CH3515 is the option for H35, heavy interruptions in hardened steels.

The grade contains 90 % cBN and is the toughest grade in this new PCBN grade chain. It has a (Ti,Al)N coating which gives its yellow colour which improves tool life, and the yellow colour also makes it easy to identify tool wear.

 New substrate + (Ti,Al)N coating = A H35 Success

For more information, please contact your local Seco representative, or our Advanced material (PCBN/PCD/CERAMIC) team.

Author: Per Ola Jönander Product Specialist SECOMAX PCBN/PCD/CERAMIC SECO TOOLS AB 737 82 Fagersta, Sweden Office +4622340818 Mobile +46703163555 email:perola.jonander@secotools.com

Secomax™ CH2540 02:10

High performance PCBN Grades for hard part turning 

CH2540 is a completely new grade for H25, interrupted cuts, but also for mixed operations with both interrupted and continuous cuts.

A new type of substrate with a bimodal grain size distribution where the base is fine grained with additions of coarser grain size.

Patented (Ti,Si)N single layer coating manufactured with the latest PVD coating technology.

New substrate + Patent coating = A H25 Success

For more information, please contact your local Seco representative, or our Advanced material (PCBN/PCD/CERAMIC) team.

Author: Per Ola Jönander Product Specialist SECOMAX PCBN/PCD/CERAMIC SECO TOOLS AB 737 82 Fagersta, Sweden Office +4622340818 Mobile +46703163555 email:perola.jonander@secotools.com